Awning safety
Council is undertaking an awning safety audit of all awnings and other structures that overhang Council's footpaths.
About
The audit involves writing to every property and making them aware of the audit and the necessary steps that building owners will need to complete to ensure that these structures are not a safety risk.
Simply, building owners will be required to obtain certification from an engineer confirming that the building is safe. Where the engineer identifies work that is required to be carried out, Council will require that work to be completed and have the engineer certify that works have been satisfactorily completed.
Where necessary, if building owners do not complete necessary works, heavy fines and legal action will apply.
What do I have to do?
Council will contact every building owner in writing. Most buildings will require the following sample information to be submitted to Council.
Condition of the internal structural members / components within the awning (this may involve temporary removal of either roof sheeting or ceiling linings for inspection).
- Adequacy of the storm water drainage system.
- Adequacy of the anchor points, awning frame and condition of soffit and attached signage.
- Comment on the level of bird infestation within the awning.
- Expiry date of certification (certificate should not be valid for more than 5 years).
- Engineer’s qualification and date of inspection.
Questions and answers
Why am I being asked to obtain engineering certification for my awning/structure?
On the advice of the Department of Planning and Environment, Council is undertaking an assessment of the number, nature, age, condition and location of these structures. Council has a responsibility to ensure that the public are not at risk of death or injury.
What issues will Council require to be checked and certified?
Generally, Council will require your engineer to certify the structural adequacy of the awning for the next five years, certify that the stormwater system is working satisfactorily, and ensure that your engineer has considered information prepared by the Association of Consulting Structural Engineers. There may be other matters specific to individual properties and these will be identified by Council to assist owners and their consultants as required, eg, other parts of the front of the building may be damaged or require repairs.
Where can I find a suitably qualified engineer to advise me?
Professional bodies representing the engineering profession (such as Engineers Australia) or general internet searches may be helpful for locating suitably qualified and experienced persons to assist you.
Where can I find a company that can repair or install awnings?
An internet search for "shop awnings Sydney" will reveal several businesses. Don't forget to ensure that you only use qualified, licenced and insured companies to maximise your consumer rights and ensure the work is of an appropriate standard.
Do I need any approvals to carry out repairs or rebuild my awning?
Generally, only minor work and repairs may be able to be carried out as exempt or complying development. As many shops are also heritage affected, it is strongly recommended that you contact Council with details of proposed works to check whether development approvals are needed.
If your contractors need to block the road or footpath or dig up the footpath or road for drainage works, you will need to apply for approval from Council by submitting a road opening permit application form.
Do I need Council approval to work on the footpath and how do I get it?
If your contractors need to block or occupy a road, footpath or car park, or construct hoarding, scaffolding or temporary fencing, you will need to apply for a permit and licence from Council.
Are there any special requirements for a property in a heritage conservation area or an item of environment heritage?
Yes, there are special requirements for heritage affected properties. If necessary, works have been identified by the supervising engineer full details of the proposed works need to be submitted to council prior to proceeding with the work. This is to ensure that the work does not breach any heritage controls and if it complies with Council requirements regarding awning safety.
What are the fines or penalties for not complying with Council's order?
Council can act in this regard under different legislation depending on the specific circumstances. Failure to comply with an order under the Environmental Planning and Assessment Act can result in a fine of $3,000 for an individual and $6,000 for a company. If matters remain unresolved legal action may be required.
Does the awning need to have public liability insurance?
Council strongly recommends owners of a structure which overhangs a public footway, road, reserve, or space, hold appropriate insurance cover to the value of $20 million and nominate Ku-ring-gai Council as an interested party on the policy.
Background
The awning safety program follows the receipt of NSW Department of Planning and Environment circulars regarding awning safety in response to deaths in Bathurst and Balgowlah as a result of unsafe awnings collapsing.
Enquiries
If you have any questions, you can phone 02 9424 0000 or email krg@krg.nsw.gov.au.
More information
View Council’s general information / notification letter(PDF, 94KB)
Practice Paper 18 Inspection and Assessment of Existing Tied Awnings July08 (acse.org.au)
Hoarding Application